Monday, March 30, 2020

what is N95 Mask ?? types of Masks:

Corona COVID19 and Masks :
मास्क के बारे में सारी कीमती जानकारी संक्षेप में हिंदी और IN  ENGLISH: 

In this era of Corona panic and fear, there are lot of confusions and misconceptions existing regarding the use of mask, not only amongst the laypersons but also among the health care providers.
On one hand masks are not available for the risk group while on other hand, who are not at risk, spending unnecessary money and energy to procure these masks.
This situation provoked me to write these details, hope this would improve the understanding about the various types of commonly used masks and clarify the proper indications of use.

Q1 ... What are the common types of masks
Ans:
1 Cloth mask
2 Surgical mask

Q2... What are the Respirators?
Ans:
N- 95
N- 99
N- 100
are the respirators.

Q3 : what is the difference between mask and respirator
Ans: Mask has loose fit, it doesn't seal nose and mouth snugly.
During respiration air moves along the edges of the mask, while respirator has tight seal and most of the times air passes only through its material after filtration.

Q4: Are all respirator masks are same
Ans: No, respirators are graded according to their filtration efficiency.
According to the used filter type According to the type of materials used And additional features They are of different types.

Q5: what is the efficiency grading
Ans : According to the efficiency of filtration these are usually graded as-
95, 99 and 100 Means these respirator masks are capable of traping 95%, 99% and 99.9% of particles, smaller up to the 0.3 micron size.
This grading can also be done as
P1 (FFP1) - 80%
P2 (FFP2) - 95%
P3 (FFP3) - 99.95%
Filtration efficiency.

Q.6: What is the N,R or P meaning written over mask
Ans...
N - not oil proof
R- oil resistant
P- oil proof
(Eg. N 95 is not oil proof).

Q7. Few repirator masks have valve, what is that.
Ans : That valve is nothing but a simple exhalation port with one way valve mechanism, it reduces effort of expiration, reduce heat inside the mask, dissipate humidity and reduce co2(carbon Di Oxide) the amount of from the  dead space of mask.

Q.8.. When to use surgical masks?
Ans... Surgical mask or procedure mask is the most common mask used by health workers.
It is not designed to protect wearer from inhaling the air born bacteria and viruses.
It is used to block only large particle droplets, splashes, sprays or splatter.
It also reduce the exposure of wearer's saliva and respiratory secretions to  others. Surgical mask also remind wearer not to touch their mouth/nose which could otherwise transfer virus/bacteria after having touched a contaminated surface.

Q9: what is the filtration capacity of surgical mask
Ans: It can vary between 10-90% according to the manufacturer.

Q..10.. how one can assure about the quality of mask
Ans..
Mask should be certified by the
NIOSH (National institute for occupational safety and health)
Or
NPPTL (National personal protective technology laboratory)

Q.11:  Does cloth mask effective?
Ans.
Cloth is a wooven material thus pore size is bigger than surgical mask which is made up of non wooven polypropylene material thus cloth mask is less effective than surgical mask in terms of filtration efficiency.

Q12 :  Does extra layer improve efficacy of cloth mask
Ans: No, it's not advisable. Each extra layer adds only 2% of extra protection on the cost of comfort .

Q.13: Can surgical/cloth mask be used routinely
Ans.
Yes these can be used routinely.
Few studies done on normal population concluded that the use of simple mask can decrease the incidence of flu up to 75%.
Few east asian countries following this practice of routine use of mask.

Q.14: Can mask be reused?
Ans: Cloth mask can be reused after washing
- Surgical mask should be discarded after single use or after soiled
- Respirator mask should be discarded when resistance of breathing get increased or get soiled. Viruses/bacterias can grow and flourish inside the reused mask.

Q15: what are the WHO recommendations for using masks?
Ans...
- *For the normal population, any type of mask is not required, maintaining the social distance and hand hygiene are the sufficient.*
- Sick person should wear surgical mask
- Any person who is taking care of sick person should also wear the surgical mask.
- N 95 mask should be used by the person who is potential to get expose with the respiratory secretions of the infected patient eg. During the Endotracheal intubation, CPR, Ventilation, Bronchoscopy and Tracheostomy etc.

Summary:
Please don't create panic and use this precious commodity judiciously⚖...
lets create A Better World...🌈

Thanks for giving your precious time and attention..

The Better World , in association with KN Healthcare & Lotus Safety ...TheBetterWorldindia@outlook.com
🙏🙏🙏🙏🙏🙏🙏🙏


कोरोना काल मे मास्क के पहलुओं के बारे में सारी कीमती जानकारी संक्षेप में:

कोरोना कोविद19 की घबराहट और भय के इस युग में, मास्क के उपयोग के बारे में बहुत सारे भ्रम और गलत धारणाएं मौजूद हैं, न केवल आम आदमी के बीच बल्कि स्वास्थ्य देखभाल सेवा प्रदाता स्वास्थ्य कर्मियों health workers के बीच भी।

एक तरफ इस जोखिम समूह के लिए मास्क उपलब्ध नहीं हैं, जबकि दूसरी तरफ, जो जोखिम में नहीं हैं, इन मास्क को खरीदने के लिए अनावश्यक धन और ऊर्जा खर्च करते हैं।

इस स्थितियों ने मुझे इन विवरणों को लिखने के लिए उकसाया, आशा है कि यह आमतौर पर इस्तेमाल किए जाने वाले विभिन्न प्रकार के मास्क और रेस्पिरेटर्स (Mask & Respirators)  के बारे में सामान्य समझ में सुधार करेगा और उपयोग के उचित संकेतों को स्पष्ट करेगा। 

Q1 : मास्क के सामान्य प्रकार क्या हैं?

उत्तर:

1 कपड़े का मास्क

2 सर्जिकल मास्क


Q2 : रेस्पिरेटर क्या हैं?

उत्तर:

एन- 95

एन- 99

एन- 100 

श्वासयंत्र हैं।


Q3: मास्क और श्वासयंत्र(रेस्पिरेटर्स) बीच अंतर क्या है?

उत्तर: मास्क ढीली फिट होती है, यह नाक और मुंह को (ज्यादा ताकत से)किनारों से सील नहीं करता है। श्वसन के दौरान मास्क के किनारों के साथ हवा चलती है। जबकि श्वासयंत्र (रेस्पिरेटर्स) में किनारे सील्ड होते है और अधिकांश समय वायु केवल निस्पंद के बाद अपनी फिल्टर सामग्री से गुजरती है।


Q4: क्या सभी श्वासयंत्र मास्क समान हैं?

उत्तर: नहीं, सांस लेने वालों को उनकी निस्पंदन क्षमता के अनुसार वर्गीकृत किया जाता है।

उपयोग किए गए फ़िल्टर प्रकार के अनुसार, उपयोग की गई सामग्री और अतिरिक्त सुविधाओं के प्रकार के अनुसार वे विभिन्न प्रकार के होते हैं।

Q5: दक्षता ग्रेडिंग क्या है?

उत्तर: निस्पंदन की दक्षता के अनुसार ये आमतौर पर निम्नानुसार वर्गीकृत किए जाते हैं-

९५, ९९ और १०० अर्थात ये रेस्पिरेटर मास्क ९५%, ९९% और ९९.९% कणों को अपने जाली(फिल्टर) में फंसा कर रोकने में सक्षम हैं, जो ०.५ माइक्रोन आकार से छोटे होते हैं। इनकी इस प्रकार ग्रेडिंग (वर्गीकरण) भी किया जाता है: 

P1 (FFP1) - 80%

P2 (FFP2) - 95%

P3 (FFP3) - 99.95%

निस्पंदन दक्षता।


Q.6: मास्क के ऊपर लिखे गए N, R या P का अर्थ क्या है?

उत्तर: ...

एन - तेलप्रतिरोधी नहीं

आर- तेल प्रतिरोधी

पी- तेल प्रतिरोधी

(उदा:  एन 95 तेल प्रमाण नहीं है)।

Q 7:  कुछ repirator मास्क में वाल्व होता है, वह क्या है?

उत्तर: वह वाल्व कुछ भी खास नहीं बल्कि एक तरह से वाल्व तंत्र के साथ एक सरल साँस लेना और छोड़ना बनाने में सहायक बंनाने की युक्ति है, यह सांस लेने की प्रक्रिया के प्रयास को कम करता है, मास्क के अंदर गर्मी को कम करता है, आर्द्रता को नष्ट करता है और सीओ 2 (कार्बन डाई ऑक्साइड) को मास्क के खाली स्थान से कम करता है ताकि पहनने वाले कि सुरक्षा और आसानी बनी रहे।

Q.8 .. सर्जिकल मास्क कब इस्तेमाल करें?

उत्तर ... सर्जिकल मास्क या प्रक्रिया मास्क स्वास्थ्य कार्यकर्ताओं द्वारा उपयोग किया जाने वाला सबसे आम मास्क है।

इसे पहनने वाले को हवा में पैदा होने वाले बैक्टीरिया और वायरस से बचाने के लिए नहीं बनाया गया है।

 इसका उपयोग केवल बड़े कण बूंदों, स्प्लैश, स्प्रे या स्प्लिटर को ब्लॉक करने के लिए किया जाता है।

यह दूसरों को पहनने वाले की लार और श्वसन स्राव के जोखिम को भी कम करता है। सर्जिकल मास्क पहनने वाले को याद दिलाता है कि वे अपने मुंह / नाक को न छुएं जो दूषित सतह को छूने के बाद वायरस / बैक्टीरिया को स्थानांतरित कर सकता है।


Q9: सर्जिकल मास्क की निस्पंदन क्षमता क्या है?

उत्तर: यह भिन्न भिन्न निर्माता के अनुसार 10-90% के बीच भिन्न हो सकता है।

Q10  मास्क की गुणवत्ता के बारे में कोई कैसे आश्वस्त हो सकता है?

उत्तर: ..

मास्क की गुणवत्ता को प्रमाणित करने वाली अजेंसीज  NIOSH (व्यावसायिक सुरक्षा और स्वास्थ्य के लिए एक राष्ट्रीय संस्थान ) या एनपीपीटीएल (राष्ट्रीय व्यक्तिगत सुरक्षा प्रौद्योगिकी प्रयोगशाला) से प्रमाणित हो तो सर्वश्रेष्ठ या फिर उत्पादक द्वारा ।

Q.11: क्या कपड़ा मास्क प्रभावी है?

उत्तर: कपड़ा एक बुना हुआ पदार्थ होता है, अक्सर इसके छिद्र का आकार सर्जिकल मास्क के छिद्र से बड़ा होता है, जो नॉन वूवन पॉलीप्रोपाइलीन सामग्री से बना होता है, इसलिए कपड़े का मास्क निस्पंदन दक्षता के मामले में सर्जिकल मास्क की तुलना में कम प्रभावी होता है।

प्रश्न 12: क्या अतिरिक्त परत कपड़ा मास्क की प्रभावकारिता में सुधार करती है?

उत्तर: नहीं, यह ज्यादा सही नहीं है। प्रत्येक अतिरिक्त परत सांस लेने के आराम की कीमत पर अतिरिक्त सुरक्षा का केवल 2% जोड़ती है।

Q.13: क्या सर्जिकल / क्लॉथ मास्क का नियमित उपयोग किया जा सकता है?

उत्तर: हाँ, इनका नियमित उपयोग किया जा सकता है।

सामान्य आबादी पर किए गए कुछ अध्ययनों ने निष्कर्ष निकाला कि साधारण मास्क के उपयोग से फ्लू की घटनाओं में 75% तक की कमी आ सकती है। नकाब(मास्क) के नियमित उपयोग के अध्ययन के बाद कुछ पूर्व एशियाई देश इसका प्रयोग करते रहे है। 

Q.14: क्या मास्क का पुन: उपयोग किया जा सकता है?

Ans: बिल्कुल , कपड़े के मास्क को धोने के बाद फिर से इस्तेमाल किया जा सकता है।

- सर्जिकल मास्क को एकल उपयोग के बाद या गंदे होने के बाद छोड़ देना चाहिए।

- जब सांस की प्रतिरोधक क्षमता बढ़ जाती है या गंदे हो जाते हैं तो रेस्पिरेटर मास्क को छोड़ देना चाहिए। वायरस / जीवाणु पुन: उपयोग किए गए मास्क के अंदर विकसित और पनप सकते हैं।

Q15: मास्क का उपयोग करने के लिए डब्ल्यूएचओ की क्या सिफारिशें हैं?

उत्तर: सामान्य आबादी के लिए, किसी भी प्रकार के मास्क की आवश्यकता नहीं है, शारीरिक दूरी बनाए रखना और हाथ की सफाई ही पर्याप्त है। 

- बीमार व्यक्ति को सर्जिकल मास्क पहनना चाहिए।

- कोई भी व्यक्ति जो बीमार व्यक्ति की देखभाल कर रहा है, उसे भी सर्जिकल मास्क पहनना चाहिए।

- एन 95 मास्क का उपयोग उस व्यक्ति द्वारा किया जाना चाहिए जो संक्रमित रोगी के श्वसन स्राव के साथ बाहर निकलने की मजबूरी रखता  है जैसे। एंडोट्रैचियल इंटुबैशन, सीपीआर, वेंटिलेशन, ब्रोंकोस्कोपी और ट्रेकियोस्टोमी आदि के दौरान।

सारांश:

कृपया घबराएं नहीं और इस कीमती वस्तु का विवेकपूर्ण उपयोग करें ...और एक बेहतर दुनिया🌈 के निर्माण में अपनी सकारात्मक भूमिका निभाते हुए अपना सहयोग दें.....

अपना कीमती समय देने और ध्यान से पढ़ने के लिए आपका आभार और धन्यवाद ।

डरें नहीं, लड़ें !👍

बस सजग रहे , सतर्कता बरतें..🙏

केएन हेल्थकेयर विशाखापत्तनम और लोटस सेफ्टी रायपुर के साथ मिलकर द बेटर वर्ल्ड🌐 ... TheBetterWorldindia@outlook.com

🙏🙏🙏🙏🙏🙏🙏🙏

Monday, March 23, 2020

Servo Voltage Stabilizer , AVC ( Automatic Voltage Controllers ) , dimmer and linear voltage controllers


IMPORTANCE OF AUTOMATIC VOLTAGE CONTROLLER (AVC):
Voltage variation is today one of the major problems afflicting almost every electricity consumer / industry all across the country.  Generally, voltage is low during daytime and high during the night hours / holidays / rainy season.  High Voltage phenomenon often goes undetected by consumers, whereas Low Voltage is evidently noticeable.  Both, Low and High Voltage, result in excessive power losses of electrical equipment, resulting in their premature failure apart from inflated electricity bills
The growing use of sophisticated electrical and electronic equipments, requiring a near constant voltage supply for efficient operation, makes line voltage regulation increasingly necessary and to finer limits.  Thus, AVCs or Voltage Stabilizers fulfill this growing need of providing constant voltage supply.
ADVANTAGES OF AVC:
An AVC resolves 99% of voltage problems automatically, and ensures steady voltage supply round the clock at an effective monthly cost of an electrician.  Some key advantages of installing an AVC are:
Up to 80% Reduction in Break Down of Electrical Equipment
Up to 30% Savings in Electricity Costs
Improved Productivity of Plant due to less breakdowns
Uniform Quality of End Product
Reduction in MDI (Peak Demand)  & Improvement in Power Factor
80% Depreciation as per Income Tax Act in India (being an energy saving device)

PAY-BACK PERIOD:
As per our customers feedback, the payback period for an AVC is typically between 624 months owing to the aforesaid benefits (depending upon the no. of working hours and input voltage variation.

How to choose between Rolling Type And Variac Type Servo Voltage Stabilizer: 
Now that you have opted for a Servo automatic stabilizer, you need to decide which kind of stabilizer you want. Here is a step-by-step comparative analysis between rolling contact type and variac type servo voltage stabilizer.

Mechanism
Movement of the carbon as it moves, it always rolls. As the name suggests the carbon contact used is in form of a Roller. Movement of the carbon as it moves, it always slides. The carbon contact used is in form of a Brush.
Durability of the Carbon Brush
Wear and Tear of the carbon brush is at a minimum in A rolling type Servo Stabilizer due to frictionless and smooth surface of the winding track. In a Variac, wear and Tear of the carbon brush is more due to friction and rough surface of the track, resulting in shorter life.
Better Conduction
Copper conductor used in the case of a rolling type is of Copper Strip and not copper wire; copper strip so used serves as a better current carrying conductor. Whereas, the copper conductor so used is Copper Wire, which comparatively has low current carrying capacity.
Durable Core material used
Core used at  Rolling stabilizer is purely Cold rolled Non Grain Oriented or CRGO that too fresh and not the reused one, the core so used is constructed from low loss, cold rolled, grain oriented, annealed laminations of electrical sheet steel conforming to the latest international standards. Core used in Variac type is generally CRNO (i.e. Cold rolled Non Grain Oriented) which has higher losses value in comparison to CRGO. Very rarely CRGO is used and that too made from the reused material.
Easy Assembling
Inspection of the Carbon roller of a rolling type stabilizer can be done without taking out the whole Transformer / Regulator assembly. Only by removing the top cover the condition of the carbon rollers can be observed. Whereas in a Variac type, it is completely the opposite, the transformer has to be taken out.
Backup controller
In the case of failure of the rolling type stabilizer’s automatic controller, the same can be operated manually by raise lower button, in case the motor also fails to work the Hand Wheel provided on the side of the stabilizer can be operated manually and the carbon roller can be positioned to give desired output. While the Variac type has a manual operator, it still misses out on the hand wheel part.
Higher Efficiency :
Efficiency of the  Rolling Contact Type Stabilizer is approximately 98% to 99% resulting in minimum losses and lesser electricity bills while efficiency of these Variac Stabilizers is not more than 95% to 96% resulting in more loses and higher electricity bills.
Can be used in any premises
Installation of Rolling Contact Type Stabilizer can be done for Indoor or Outdoor services. Installation of Variac or Dimmer Type Stabilizer can be done only for Indoor services.

Life of a Rolling stabilizer is better than a Variac stabilizer
Life of Rolling Contact Type Stabilizer under normal working conditions is 15 – 20 Years while Life of Variac / Dimmer Type Stabilizer under normal working conditions is approx 3 - 6 Years.


From the above write-up, you must have inferred that Rolling stabilizers are much better than Variac Stabilizers
But VARIAC type has following advantage over Rolling contact linear type is VARIAC has faster  Voltage correction speed,  lightweight and cheaper in cost.
   
 Rolling contact Linear type Vs Variac based or dimmer type : 
Given below are a few of the superior features of our SERVO VOLTAGE STABILIZER as compared to the conventional ones: using square copper section to facilitate more current carrying capacity.
We insist on the use of chain drive allowing the regulating transformer to be driven at relatively higher speeds yielding smooth commutation avoiding potential jamming.
 Carbon Roller Assembly Vs ordinary brushes.  The torroidal type dimmer has to be cleaned very often because the brushes wear deposit and carbon on the track.  The roller assembly used by us yields very low wear with the contact life expectancy exceeding 1,00,000 meters of track level.
In case of jerking loads the normal carbon brush tends to wear off because of its size limitation which would ultimately affect the efficiency of the system, whereas our roller assembly with stands jerks very effectively without hampering the working.
The core is built from grain oriented silicon steel laminations which keeps iron loses to minimum values.  The flux density is not allowed to rise to the saturation points point thus reducing output waveform distortion.
Linear type Roller servo withstand an overload of 20 times than normal current for a small period, which is a unique feature in itself.  The conventional ones will immediately burn in case of any overloading.
The efficiency of  Linear  Stabilizer at 75% load is more than 99%.
ADVANTAGES Linear type AUTOMATIC VOLTAGE CONTROLLER
In case, you find that your input voltage is higher even for few hours a day  then you can reduce failure rate of electrical equipments by installing Rolling contact linear S AVC & will have following advantages:
REDUCTION IN BREAKDOWN OF ELECTRICAL EQUIPMENTS:  60  80% reduction in breakdown of motors, contractor coils, bulbs, tubes etc. depending upon the Input Voltage variation and working hours of the plant.
ENERGY SAVING: With the installation of AVC, 5-10% power saving is certainly possible.  Power losses of any electrical equipment increase at low or high voltage.  With the stabilized voltage at 390-400 Volts, the extra losses generated due to low / high voltage can be considerably reduced that will automatically result in energy saving.
You will find from a table in our AVC catalogue that you can achieve power savings of up to 10% on motor load & 30% on lighting load, besides up to 60% reduction in breakdowns. 
REDUCTION IN MDI (Max Demand Indicator):  There will be definite reduction in MDI by 10  15% after the installation of an AVC.  MDI is a multiplication of voltage & current and is half an hour reading.  At higher input voltage, the current of electric motors also increases.  So, the MDI also increases.  For Example:
Consider a 10H.P.Motor
Suppose, current at 400 Volts    = 12 Amps
Current at 450 Volts                           = 14 Amps
MDI at 400 Volts = (400 x 12) / 1000 = 4.8 KVA
MDI at 450 Volts = (450 x 14) / 1000 = 6.3 KVA
% increase in MDI at 450 Volts as compared to 400 Volts = ((6.3  4.8)/ 4.8) x 100% = 31.25%
Even if the high voltage occurs for half an hour in a month, the MDI increases.  With the installation of the AVC, the voltage will be controlled and MDI will also be controlled.
IMPROVEMENT IN POWER FACTOR:  Whenever the voltage increases above 440 Volts, there is a sharp reduction in power factor at least by square function of voltage .At higher input voltage (i.e. >400 Volts), excitation current (No Load Current) of the industrial motors increases.  The power factor of no load current is normally (0.2).  So as the voltage increases, the excitation current also increases which further lowers the power factor. By maintaining constant voltage at 390/400 Volts with help of AVC, there will be definite improvement in power factor by 10-15%.
Uniform Quality of end Product& Increase in Throughput:  With stabilized input voltage to your sensitive production equipments, you can ensure that your production processes run consistently & continuously, without any interruption / aberration, thus ensuring uniform quality of end product as well as increase in output.
Depreciation allowance @ 80% as per Income Tax Act

PAY-BACK PERIOD:
Owing to the high efficiency of Rolling contact linear S AVC (> 99% in avg. running conditions)  payback period of Linear  AVC is normally within 6-12 months, depending upon the input variation and the number of working hours.      

Variacs Dimmer type  STABILIZERS


Torroidal Dimmers are used, wound with max. 8 mm² copper wire.  Cross-section area is 3 times lesser.  I²R losses are more.

Heat generated is more.  Size is bulky.  Quantity of oil is more.


Regulators are straight 254 volts type, remaining always in circuit. At any given point, it will contain its max. current.

Light duty carbon brushes are used which are in full contact with the winding.  Wear & tear requires change of brushes periodically.


Light duty. Suitable only for partial loads. 


Maximum life is 5-8  years if operating at full load.


Prone to damage when working on high capacity motors and jerking loads.  Double the capacity is required for such applications.

Overall efficiency max. 95%.  Running cost is high as the stabilizer will consume 5% energy itself. A 100 kVA stabilizer will consume approx. Rs.1,00,000 worth of energy per year (assuming 70% avg. running load for 24 hours a day, working 300 days a year).

Warranty 1  2 years.  AMC @ 10% of its value thereafter.




ROLLING CONTACT Lineae  STABILIZERS


Linear type regulators wound with min. 24 mm² copper strips.  Since the cross-section area is more, I²R losses are much less. (R =   L/A)

As the losses are less, heat generated is less.  The size of the stabilizer is very compact, the quantity of oil less. 

Regulators are ± 440 or ± 254 volts therefore half the capacity is sufficient.  At max buck or boost position, regulator is out of circuit.  No losses at those points.

Graphite Carbon roller assemblies are used, which do not require replacements for at least 8  10 years (or 100,000 meters of travel).  There is no wear & tear of the bared copper track.

Suitable for 100% continuous duty cycle.  Sufficient overload bearing capacity due to its liberal design.

Life at full load is 15  20 years.


No effect on jerking loads or with heavy starting current machines.  Same capacity Stabilizer can be installed.

Over all efficiency is 99% resulting in minimum running cost.  A 100 kVA stabilizer will consume only about Rs.20000/- worth of energy per annum (assuming 70% avg. running load for 24 hours a day, working 300 days a year).


Unconditional Guarantee for 5 years.  Service network all over the country.  Maintenance requirements are minimal & cost very nominal.

For any queries or clarification you can contact me at +91-9165234616 or TheBetterWorldindia@outlook.com

Monday, March 16, 2020

fight Corona and make a mask at your home

घर मे बना सकते हैं ऐसा मास्क, जिसे आप रोज धो भी सकते है।

 महंगा मास्क लेने से बचें और घर का अच्छा reusable मास्क प्रयोग करें।

Don't rush to purchase a N95 mask and be panic on shortage of 3Ply mask , because you can make a very useful and effective mask at your home with the help of your handkerchief and rubber band .

N95 मास्क खरीदने में जल्दबाजी न करें और 3Ply मास्क की कमी से घबराएं, क्योंकि आप केवल अपने रूमाल और रबर बैंड की मदद से अपने घर पर बहुत उपयोगी और प्रभावी मास्क बना सकते हैं। कृपया ये छोटा सा वीडियो देखें और समझें। 

https://youtu.be/FmOBfT5tk7g



🙏

How to Make an effective hand Sanitizer at your home , don't get panic with corona

हैंड सेनेटाइजर घर मे बनाएं  make a good Hand Sanitizer at your home
============
Hand sanitizer से कोरोना का वायरस मरता भी है या नहीं पता नहीं, लेकिन इसकी बिक्री बेहद बढ़ चुकी है market यानी बाजार में इसकी कमी है और है भी तो बहुत महंगे में बिक रहा है । टीवी पर आने वाले डॉक्टर गर्म पानी या नींबू के रस से हाथ धोना भी बता सकते थे हम ग़रीब देश के वासियों को लेकिन कोई बताएगा नहीं, क्योंकि यहाँ भी लोगों को प्रोडक्ट बिक्री करनी है।

दो रुपये का नींबू साथ रखिये, उसे थोड़ा सा ऊपर से काट लें। अब जब भी ज़रूरत हो उसकी कुछ बूंदें हाथ पर टपकाएं और उससे हाथ साफ करलें...
 यक़ीन कीजिए यह उतना ही असरदार है जितना कि 600 रुपये लीटर के टीवी स्क्रीन पर 99% जर्म्स मारने वाले ब्रांडेड हैंड सेनेटाइजर...

यकीन कीजिए ये बहुत असरदार होता है..
🙏🙏

Thursday, March 12, 2020

salute to Healthcare community

स्कूल बंद हो गए,
ऑफिस बंद हो गए,
मॉल खाली हैं,
समारोह तक रदद्,
उड़ानें थम गई,
अर्थव्यवस्था नीचे की ओर,
यहां तक ​​कि अंतरराष्ट्रीय सीमाएं भी बंद हो गईं ।
🤔🤔🤔
लोग एक-दूसरे को देखकर 
सहम जाते हैं, 
छूना भूल जाते हैं ।।
😰😰😰 ऐसा है कोरोना का डर...

लेकिन, 
अस्पताल अभी भी खुले हैं, ambulances चल रही हैं ,  वे  अभी भी रोगियों की जांच करने के लिए उन्हें छूते हैं, इलाज और रोकथाम में लगे हैं... ।
अगर आपको सर्दी, खांसी और बुखार है तो भी ये संकोच नहीं करते,
और न ही 3 मीटर दूर हट जाते हैं ...

एकमात्र समुदाय जो सबसे अधिक जोखिम में है, 
फिर भी अपने mission से पीछे नहीं हट रहा है....,

एक सलाम तो बनता है  स्वास्थ्यसेवा से जुड़े कर्मचारियों के नाम !
👍👍👍👍👍👍👍

Wednesday, March 11, 2020

kabhi kabhi yun bhi humne apne dil ko bahlaya hai, jin baton ko khud nahin samjhe auron ko samjhaya hai...

कभी कभी यूँ भी हमने अपने जी को बहलाया है,
जिन बातों को ख़ुद नहीं समझे औरों को समझाया है...

हमसे पूछो इज़्ज़त वालों की इज़्ज़त का हाल कभी,
हमने भी इस शहर में रह कर थोड़ा नाम कमाया है..

उससे बिछड़े बरसों बीते लेकिन आज न जाने क्यों,
आँगन में हँसते बच्चों को बे-कारण धमकाया है..

कोई मिला तो हाथ मिलाया; कहीं गए तो बातें की,
घर से बाहर जब भी निकले दिन भर बोझ उठाया है...

-निदा फ़ाज़ली की लिखी और जगजीत सिंह की एक खूबसूरत ग़ज़ल Album: Visions (पर मैंने "रिश्तों में दरार आई" कैसेट में सुना है) , ये लाइनें आज एक मित्र ने भेजा और बहुत अच्छा लगा , काफी सुना है इस ग़ज़ल को कैस्सेट्स के ज़माने में, वो दौर अलग था, दुनिया भी अलग थी, 10-12 गाने होते थे एक cassette में और इतना सुनते थे की lyrics, tune और sequence भी याद हो जाता था...ये ग़ज़ल बहुत सरल और अर्थपूर्ण लगती थी और आज भी लगती है, और सोंचे तो हर कोई समझ और correlate कर सकता है....किसी को ग़ज़ल पसंद हो मगर ये नहीं सुन पाये हो तो ज़रूर सुनें आशा है आपको ज़रूर पसंद आयेगा...
(Copied from my Facebook wall 2017)

यकीन The Faith , The Belief

यकीन ( The Belief, The Faith ):

एक सुबह सर हेनरी फोर्ड अपने हाथ में एक कागज लेकर बैठ गए।उस कागज पर उन्होंने V8 इंजन का डिजाइन बनाया था।
फोर्ड ने फ़ौरन अपने इंजीनियरों की एक टीम को अपने कार्यालय में बुलाया और उनके साथ उस इंजन की रूपरेखा पर विचार करने लगे।

"सर। आठ-सिलेंडर वाला गैसोलीन इंजन ब्लॉक बनाना नामुमकिन काम है,” उनके एक अनुभवी इंजीनियर ने कहा।

"लेकिन इसे बनाओ," फोर्ड ने मजबूत आवाज में जवाब दिया।

"पर, आप समझ नहीं रहे हैं सर," उन्होंने उत्तर दिया, "यह बिल्कुल असंभव है!"

"इस काम पर तब तक जुटे रहो, जब तक इंजन बन नहीं जाता, चाहे कितना भी समय क्यों न लगे, मुझे यह इंजन तैयार चाहिए," फोर्ड ने मांग की।

उन्हें पूरा यकीन था कि वे अपनी योजना में निश्चित रूप से सफल होंगे।

फोर्ड की जिद्द सुनकर सभी इंजीनियर लोग घबरा गए।

कुछ लोग शिकायत करने लगे, “फोर्ड का दिमाग खराब हो गया है! उन्हें पता नहीं कि असंभव का क्या मतलब होता है! उन्होंने ये क्या मुसीबत खड़ी कर दी है, इंजन तैयार नहीं हुआ तो हमारी नौकरी चली जाएगी!

फिर उन्होंने बिना कुछ बोले इंजन पर काम करना शुरू कर दिया।

छह महीने बीते…

"क्या मेरी वी-8 मोटर तैयार है!" फोर्ड ने आकर पूछा…

नौ महीने बीत गए ...

तब भी इंजन तैयार नहीं हो पाया था।

इंजीनियरों ने हर तरह से दिमाग दौड़ाया, लेकिन यह काम अभी भी 'नामुमकिन' लग रहा था।

साल के आखिर में, सर फोर्ड ने अपने इंजीनियरों का दौरा किया, तब भी इंजीनियरों ने उन्हें यही बताया कि यह काम नहीं हो पाएगा।

" कोशिश करते रहो", फोर्ड ने कहा, "मुझे हर हाल में यह इंजन तैयार चाहिए!"

इंजीनियरों के पास कोई दूसरा चारा नहीं था। वे महीनों तक कड़ी मशक्कत करते रहे, तब तक, जब तक कि 'वी -8' नामक प्रसिद्ध इंजन बनाने का रहस्य खोज नहीं लिया गया और 1932 में पहली फोर्ड वी-8 कार लांच हो पाई।

"कौन सा एक कारक है, जो यह निर्धारित करता है कि कोई व्यक्ति जीवन में सफल होगा या नहीं?"

उत्तर है- 'यकीन'।

यकीन या विश्वास के बिना सफलता असंभव है।
सब कुछ यकीन के साथ शुरू होता है।
अगर आपको 'यकीन 'है कि आप सफल हो पाएंगे तो आप निश्चित रूप से होंगे, अगर 'यकीन 'नहीं है तो आप कभी सफल नहीं हो सकते।

womens day! salute to the women

जिस दिन औरतें अपने श्रम का हिसाब माँगेंगी उस दिन मानव इतिहास की सबसे बड़ी और सबसे पुरानी चोरी पकड़ी जाएगी।
~ रोजा लग्जमबर्ग


On the day women ask for their labor, the biggest and oldest theft in human history will be caught.
~ Rosa Luxembourg